The Meru precast wall panels project is what I would refer to a big success.

Mr. Henry Mworia was referred to global precast panels Ltd in the early days of January by one of our satisfied clients.

Well, the precast wall panel’s project location was in Meru and the mission was to supply the wall panels

Furthermore, we did also construct a 3 bedroom house containing a 1 master en-suite bedroom.

Mr. Mworia had seen the other projects and was thus satisfied with what we had done.

Well, we arranged for a meeting and agreed on all the details including;

  1. The design
  2. The materials required
  3. Logistics
  4. Cost
  5. Delivery Timelines

Precast wall panels project planning

After the fruitful engagement and discussion with our team, we agreed to commence the construction on 22/01/2018.

This date was agreed upon to facilitate the production of the precast wall panels and also give the client ample time to lay the foundation.

We commenced on this duty in readiness for the kick-starting of this precast wall panels project in Meru on 4/01/2018.

Meru precast wall panels Project Process

As always, the production of the wall panels began in earnest and the plant manager was on site to oversee the process to fruition.

The requirement was 118 panels. This was done to completion in 14 days.

The concrete wall panels production process entailed all aspects until the last point of curing and storing the panels. 

According to the design by our client, the house required 118 panels as mentioned above.

The panels measurements were as follows 0.605 meters * 90 millimeters * 2.7 meters.

The total cost for these panels was Ksh 251,576.

You may note from this cost that precast wall panels just consume a fraction of the total cost of constructing your house/ structure.

The panels are a good value for your money all factors and other materials compared as I will elaborate below.

Well, with the panels ready, it was now time to transport them to the construction site.

Construction Process

As the production process was ongoing, the client was also laying the foundation in readiness for the precast wall panels fitting.

With the foundation ready and panels on site, the construction of the house commenced.

As is the norm, all procedures were followed to the letter so as to achieve our mission as agreed with Mr. Mworia.

This precast wall panel’s project went on and in a record 14 days, fitting of the panels and roofing had been accomplished.

After these two procedures, it was time to embark on the interior and exterior décor.

This was carried out by our team and just to let you know, this was also done in record time because wall panels do not require any plaster.

The finishing process as many refer to took about two and a half weeks to complete and the results were amazing.

In regards to interior décor, this entailed plumbing works, electrical installation, floor tiling, ceiling Installation and paint works.

On exterior décor, it was about paintwork, plumbing, solar water heater installation, electrical installation and a bit of landscaping.

These procedures were finalized on 26th/Feb/2018 which was 2 days short on the agreed timeline.


This Meru precast wall panels project total expenditure was Ksh 2.2 million for the complete house.

The wall panels cost was Ksh 251,576 thousand.

The cost of the panels was just an 8th of the total cost of the project.

This shows you that indeed our wall panels are the best alternative building material that you could use to bring up your house or any other structure.

We handed over the complete project on the 28th/Feb/2018 as agreed and Mr. Mworia was excited and happy at the results.

He quipped “Yes I love my new home and everything has been done to perfection and the deadline has been met”

We were also happy to add another accolade to our shelf and beyond that get another happy satisfied client.

If you are out there and brainstorming on building your home, kindly let us assist you on this.

We are ready to listen to you and advice you accordingly.

You can reach to us via phone, email or by visiting our office.

Better still, request a quote and we shall give you a comprehensive and detailed response in the shortest time possible.

We are here for you.

Categories: Projects


Nderitu · July 28, 2019 at 3:22 pm

Thanks for sharing this information. However, it would help to know for 2.2 Million how big of a house one can build using your technology. So, if you don’t mind me asking, what was the area of the house in square meters?

    Global precast panels · November 24, 2020 at 10:34 am

    Hi with 2.2M you will comfortably build a complete 3 bedroom house with all the finishes needed in side.

Samuel Mureithi · October 25, 2019 at 7:46 pm

Used your products and I’ve witnessed that they are comparatively cheap than ordinary bricks.

    Global precast panels · November 24, 2020 at 10:37 am

    this is correct thank you for the feedback

Keith · June 1, 2020 at 6:53 pm

Post more! Seriously, I am really digging what you have written so far. I’m scanning your blog right now for more things to read.

    Global precast panels · November 24, 2020 at 10:42 am

    thank you for the interest we will post more

John Ommani · July 27, 2020 at 2:57 pm

Hope to see some finished story buildings to determine quality finished products.

    Global precast panels · November 24, 2020 at 8:49 am

    share with us your mobile number on whataspp 0702247267 we share photos of finished storey buildings with you

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Open chat
Need Help?